Order Nylon Mesh | Range From 1 To 5000 Micron

1 - 5000 Micron

Products 1-82

Show

Nylon Mesh 1 Micron - Open Area %: 1 - Width: 45 in

Item #: 03-1/1 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-1/1Sefar Part #2: 3A03-0001-115-00Technical InformationMesh Opening: 1...

Nylon Mesh 5 Micron - Open Area %: 1 - Width: 45 in

Item #: 03-5/1 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-5/1Sefar Part #2: 3A03-0005-115-00Technical InformationMesh Opening: 5...

Nylon Mesh 6 Micron - Open Area %: 5 - Width: 45 in

Item #: 03-6/5 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-6/5Sefar Part #2: 3A03-0006-115-10Technical InformationMesh Opening: 6...

Nylon Mesh 10 Micron - Open Area %: 2 - Width: 40 in

Item #: 03-10/2 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-10/2Sefar Part #2: 3A03-0010-102-00Technical InformationMesh Opening: 10...

Nylon Mesh 15 Micron - Open Area %: 5 - Width: 40 in

Item #: 03-15/5 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-15/5Sefar Part #2: 3A03-0015-102-00Technical InformationMesh Opening: 15...

Nylon Mesh 15 Micron - Open Area %: 10 - Width: 40 in

Item #: 03-15/10 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-15/10Sefar Part #2: 3A03-0015-102-10Technical InformationMesh Opening: 15...

Nylon Mesh 20 Micron - Open Area %: 14 - Width: 40 in

Item #: 03-20/14 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-20/14Sefar Part #2: 3A03-0020-102-10Technical InformationMesh Opening: 20...

Nylon Mesh 22 Micron - Open Area %: 14 - Width: 61 in

Item #: 03-22/14 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-22/14Sefar Part #2: 3A03-0022-154-00Technical InformationMesh Opening: 22...

Nylon Mesh 25 Micron - Open Area %: 19 - Width: 40 in

Item #: 03-25/19 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-25/19Sefar Part #2: 3A03-0025-102-11Technical InformationMesh Opening: 25...

Nylon Mesh 28 Micron - Open Area %: 17 - Width: 40 in

Item #: 03-28/17 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-28/17Sefar Part #2: 3A03-0028-102-00Technical InformationMesh Opening: 28...

Nylon Mesh 30 Micron - Open Area %: 18 - Width: 40 in

Item #: 03-30/18 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-30/18Sefar Part #2: 3A03-0030-108-00Technical InformationMesh Opening: 30...

Nylon Mesh 30 Micron - Open Area %: 20 - Width: 45 in

Item #: 03-30/20 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-30/20Sefar Part #2: 3A03-0030-115-00Technical InformationMesh Opening: 30...

Nylon Mesh 31 Micron - Open Area %: 24 - Width: 40 in

Item #: 03-31/24 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-31/24Sefar Part #2: 3A03-0031-102-00Technical InformationMesh Opening: 31...

Nylon Mesh 35 Micron - Open Area %: 16 - Width: 45 in

Item #: 03-35/16 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-35/16Sefar Part #2: 3A03-0035-115-00Technical InformationMesh Opening: 35...

Nylon Mesh 36 Micron - Open Area %: 28 - Width: 40 in

Item #: 03-36/28 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-36/28Sefar Part #2: 3A03-0036-104-00Technical InformationMesh Opening: 36...

Nylon Mesh 37 Micron - Open Area %: 24 - Width: 40 in

Item #: 03-37/24 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-37/24Sefar Part #2: 3A03-0037-102-00Technical InformationMesh Opening: 37...

Nylon Mesh 41 Micron - Open Area %: 31 - Width: 40 in

Item #: 03-41/31 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-41/31Sefar Part #2: 3A03-0041-108-00Technical InformationMesh Opening: 41...

Nylon Mesh 48 Micron - Open Area %: 26 - Width: 40 in

Item #: 03-48/26 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-48/26Sefar Part #2: 3A03-0048-102-11Technical InformationMesh Opening: 48...

Nylon Mesh 48 Micron - Open Area %: 31 - Width: 40 in

Item #: 03-48/31 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-48/31Sefar Part #2: 3A03-0048-102-00Technical InformationMesh Opening: 48...

Nylon Mesh 50 Micron - Open Area %: 31 - Width: 42 in

Item #: 03-50/31 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-50/31Sefar Part #2: 3A03-0050-109-00Technical InformationMesh Opening: 50...

Nylon Mesh 50 Micron - Open Area %: 37 - Width: 40 in

Item #: 03-50/37 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-50/37Sefar Part #2: 3A03-0050-102-00Technical InformationMesh Opening: 50...

Nylon Mesh 53 Micron - Open Area %: 30 - Width: 40 in

Item #: 03-53/30 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-53/30Sefar Part #2: 3A03-0053-108-00Technical InformationMesh Opening: 53...

Nylon Mesh 60 Micron - Open Area %: 35 - Width: 43 in

Item #: 03-60/35 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-60/35Sefar Part #2: 3A03-0060-110-00Technical InformationMesh Opening: 60...

Nylon Mesh 60 Micron - Open Area %: 42 - Width: 40 in

Item #: 03-60/42 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-60/42Sefar Part #2: 3A03-0060-102-01Technical InformationMesh Opening: 60...

Nylon Mesh 64 Micron - Open Area %: 32 - Width: 40 in

Item #: 03-64/32 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-64/32Sefar Part #2: 3A03-0064-102-00Technical InformationMesh Opening: 64...

Nylon Mesh 64 Micron - Open Area %: 45 - Width: 42 in

Item #: 03-64/45 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-64/45Sefar Part #2: 3A03-0064-108-00Technical InformationMesh Opening: 64...

Nylon Mesh 65 Micron - Open Area %: 25 - Width: 40 in

Item #: 03-65/25 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-65/25Sefar Part #2: 3A03-0065-120-00Technical InformationMesh Opening: 65...

Nylon Mesh 65 Micron - Open Area %: 39 - Width: 40 in

Item #: 03-65/39 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-65/39Sefar Part #2: 3A03-0065-102-00Technical InformationMesh Opening: 65...

Nylon Mesh 70 Micron - Open Area %: 33 - Width: 40 in

Item #: 03-70/33 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-70/33Sefar Part #2: 3A03-0070-102-00Technical InformationMesh Opening: 70...

Nylon Mesh 74 Micron - Open Area %: 21 - Width: 40 in

Item #: 03-74/21 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-74/21Sefar Part #2: 3A03-0074-115-00Technical InformationMesh Opening: 74...

Nylon Mesh 75 Micron - Open Area %: 34 - Width: 54 in

Item #: 03-75/34 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-75/34Sefar Part #2: 3A03-0075-136-05Technical InformationMesh Opening: 75...

Nylon Mesh 80 Micron - Open Area %: 37 - Width: 40 in

Item #: 03-80/37 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-80/37Sefar Part #2: 3A03-0080-102-00Technical InformationMesh Opening: 80...

Nylon Mesh 80 Micron - Open Area %: 29 - Width: 40 in

Item #: 03-80/29 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-80/29Sefar Part #2: 3A03-0080-102-11Technical InformationMesh Opening: 80...

Nylon Mesh 80 Micron - Open Area %: 41 - Width: 40 in

Item #: 03-80/41 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-80/41Sefar Part #2: 3A03-0080-102-12Technical InformationMesh Opening: 80...

Nylon Mesh 90 Micron - Open Area %: 49 - Width: 45 in

Item #: 03-90/49 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-90/49Sefar Part #2: 3A03-0090-115-00Technical InformationMesh Opening: 90...

Nylon Mesh 100 Micron - Open Area %: 32 - Width: 38 in

Item #: 03-100/32 -

Nylon Resistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-100/32Sefar Part #2: 3A03-0100-098-00 Technical Information Mesh Opening:...

Nylon Mesh 103 Micron - Open Area %: 39 - Width: 40 in

Item #: 03-103/39 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-103/39Sefar Part #2: 3A03-0103-102-00Technical InformationMesh Opening:...

Nylon Mesh 110 Micron - Open Area %: 47 - Width: 40 in

Item #: 03-110/47 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-110/47Sefar Part #2: 3A03-0110-102-00Technical InformationMesh Opening:...

Nylon Mesh 118 Micron - Open Area %: 42 - Width: 45 in

Item #: 03-118/42 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-118/42Sefar Part #2: 3A03-0118-115-00Technical InformationMesh Opening:...

Nylon Mesh 120 Micron - Open Area %: 34 - Width: 48 in

Item #: 03-120/34 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-120/34Sefar Part #2: 3A03-0120-122-00Technical InformationMesh Opening:...

Nylon Mesh 120 Micron - Open Area %: 49 - Width: 40 in

Item #: 03-120/49 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-120/49Sefar Part #2: 3A03-0120-102-00Technical InformationMesh Opening:...

Nylon Mesh 125 Micron - Open Area %: 39 - Width: 40 in

Item #: 03-125/39 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-125/39Sefar Part #2: 3A03-0125-102-00Technical InformationMesh Opening:...

Nylon Mesh 132 Micron - Open Area %: 43 - Width: 42 in

Item #: 03-132/43 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-132/43Sefar Part #2: 3A03-0132-108-01Technical InformationMesh Opening:...

Nylon Mesh 130 Micron - Open Area %: 52 - Width: 40 in

Item #: 03-130/52 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-130/52Sefar Part #2: 3A03-0130-102-00Technical InformationMesh Opening:...

Nylon Mesh 150 Micron - Open Area %: 38 - Width: 40 in

Item #: 03-150/38 -

Nylon Resistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-150/38Sefar Part #2: 3A03-0150-102-00 Technical Information Mesh Opening:...

Nylon Mesh 150 Micron - Open Area %: 50 - Width: 40 in

Item #: 03-150/50 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-150/50Sefar Part #2: 3A03-0150-102-12Technical InformationMesh Opening:...

Nylon Mesh 160 Micron - Open Area %: 53 - Width: 40 in

Item #: 03-160/53 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-160/53Sefar Part #2: 3A03-0160-102-00Technical InformationMesh Opening:...

Nylon Mesh 165 Micron - Open Area %: 44 - Width: 60 in

Item #: 03-165/44 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-165/44Sefar Part #2: 3A03-0165-158-00Technical InformationMesh Opening:...

Nylon Mesh 170 Micron - Open Area %: 54 - Width: 40 in

Item #: 03-170/54 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-170/54Sefar Part #2: 3A03-0170-102-00Technical InformationMesh Opening:...

Nylon Mesh 180 Micron - Open Area %: 44 - Width: 40 in

Item #: 03-180/44 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-180/44Sefar Part #2: 3A03-0180-102-12Technical InformationMesh Opening:...

Nylon Mesh 190 Micron - Open Area %: 57 - Width: 40 in

Item #: 03-190/57 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-190/57Sefar Part #2: 3A03-0190-102-00Technical InformationMesh Opening:...

Nylon Mesh 200 Micron - Open Area %: 45 - Width: 40 in

Item #: 03-200/45 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-200/45 (replacement for 03-200/54)Sefar Part #2: 3A03-0200-102-15Technical...

Nylon Mesh 200 Micron - Open Area %: 54 - Width: 40 in

Item #: 03-200/54 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-200/54Sefar Part #2: 3A03-0200-102-17Technical InformationMesh Opening:...

Nylon Mesh 210 Micron - Open Area %: 33 - Width: 40 in

Item #: 06-210/33 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-210/33Sefar Part #2: 3A06-0210-100-00Technical InformationMesh Opening:...

Nylon Mesh 250 Micron - Open Area %: 34 - Width: 40 in

Item #: 06-250/34 -

Nylon Resistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-250/34Sefar Part #2: 3A06-0250-102-00 Technical Information Mesh Opening:...

Nylon Mesh 250 Micron - Open Area %: 50 - Width: 40 in

Item #: 03-250/50 -

Nylon Resistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-250/50Sefar Part #2: 3A03-0250-102-00 Technical Information Mesh Opening:...

Nylon Mesh 280 Micron - Open Area %: 51 - Width: 58 in

Item #: 03-280/51 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-280/51Sefar Part #2: 3A03-0280-158-11Technical InformationMesh Opening:...

Nylon Mesh 300 Micron - Open Area %: 34 - Width: 45 in

Item #: 06-300/34 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-300/34Sefar Part #2: 3A06-0300-115-00Technical InformationMesh Opening:...

Nylon Mesh 300 Micron - Open Area %: 51 - Width: 40 in

Item #: 03-300/51 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-300/51Sefar Part #2: 3A03-0300-102-00Technical InformationMesh Opening:...

Nylon Mesh 310 Micron - Open Area %: 45 - Width: 45 in

Item #: 06-310/45 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-310/45Sefar Part #2: 3A06-0310-115-00Technical InformationMesh Opening:...

Nylon Mesh 350 Micron - Open Area %: 35 - Width: 40 in

Item #: 06-350/35 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-350/35Sefar Part #2: 3A06-0350-103-00Technical InformationMesh Opening:...

Nylon Mesh 350 Micron - Open Area %: 42 - Width: 45 in

Item #: 06-350/42 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-350/42Sefar Part #2: 3A06-0350-115-00Technical InformationMesh Opening:...

Nylon Mesh 400 Micron - Open Area %: 38 - Width: 42 in

Item #: 06-400/38 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-400/38Sefar Part #2: 3A06-0400-106-00Technical InformationMesh Opening:...

Nylon Mesh 425 Micron - Open Area %: 46 - Width: 45 in

Item #: 06-425/46 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-425/46Sefar Part #2: 3A06-0425-115-02Technical InformationMesh Opening:...

Nylon Mesh 475 Micron - Open Area %: 56 - Width: 42 in

Item #: 06-475/56 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-475/56Sefar Part #2: 3A06-0475-108-00Technical InformationMesh Opening:...

Nylon Mesh 500 Micron - Open Area %: 38 - Width: 45 in

Item #: 06-500/38 -

Nylon Resistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-500/38Sefar Part #2: 3A06-0500-115-10 Technical Information Mesh Opening:...

Nylon Mesh 530 Micron - Open Area %: 50 - Width: 62 in

Item #: 06-530/50 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-530/50Sefar Part #2: 3A06-0530-158-00Technical InformationMesh Opening:...

Nylon Mesh 600 Micron - Open Area %: 51 - Width: 45 in

Item #: 06-600/51 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-600/51Sefar Part #2: 3A06-0600-115-10Technical InformationMesh Opening:...

Nylon Mesh 700 Micron - Open Area %: 44 - Width: 44 in

Item #: 06-700/44 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-700/44Sefar Part #2: 3A06-0700-112-00Technical InformationMesh Opening:...

Nylon Mesh 780 Micron - Open Area %: 53 - Width: 45 in

Item #: 06-780/53 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-780/53Sefar Part #2: 3A06-0780-115-01Technical InformationMesh Opening:...

Nylon Mesh 850 Micron - Open Area %: 46 - Width: 42 in

Item #: 06-850/46 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-850/46Sefar Part #2: 3A06-0850-109-00Technical InformationMesh Opening:...

Nylon Mesh 1000 Micron - Open Area %: 44 - Width: 40 in

Item #: 06-1000/44 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1000/44Sefar Part #2: 3A06-1000-110-00Technical InformationMesh Opening:...

Nylon Mesh 1000 Micron - Open Area %: 57 - Width: 42 in

Item #: 06-1000/57 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1000/57Sefar Part #2: 3A06-1000-108-10Technical InformationMesh Opening:...

Nylon Mesh 1180 Micron - Open Area %: 59 - Width: 43 in

Item #: 06-1180/59 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1180/59Sefar Part #2: 3A06-1180-110-00Technical InformationMesh Opening:...

Nylon Mesh 1250 Micron - Open Area %: 47 - Width: 45 in

Item #: 06-1250/47 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1250/47Sefar Part #2: 3A06-1250-136-02Technical InformationMesh Opening:...

Nylon Mesh 1320 Micron - Open Area %: 59 - Width: 42 in

Item #: 06-1320/59 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1320/59Sefar Part #2: 3A06-1320-108-11Technical InformationMesh Opening:...

Nylon Mesh 1400 Micron - Open Area %: 49 - Width: 62 in

Item #: 06-1400/49 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1400/49Sefar Part #2: 3A06-1400-102-10Technical InformationMesh Opening:...

Nylon Mesh 1700 Micron - Open Area %: 50 - Width: 41 in

Item #: 06-1700/50 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1700/50Sefar Part #2: 3A06-1700-104-10Technical InformationMesh Opening:...

Nylon Mesh 1800 Micron - Open Area %: 61 - Width: 45 in

Item #: 06-1800/61 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-1800/61Sefar Part #2: 3A06-1800-115-00Technical InformationMesh Opening:...

Nylon Mesh 2000 Micron - Open Area %: 53 - Width: 40 in

Item #: 06-2000/53 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-2000/53Sefar Part #2: 3A06-2000-102-10Technical InformationMesh Opening:...

Nylon Mesh 3300 Micron - Open Area %: 59 - Width: 40 in

Item #: 06-3300/59 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-3300/59Sefar Part #2: 3A06-3300-102-10Technical InformationMesh Opening:...

Nylon Mesh 5000 Micron - Open Area %: 72 - Width: 45 in

Item #: 06-5000/72 -

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 06-5000/72Sefar Part #2: 3A06-5000-115-00Technical InformationMesh Opening:...