Sefar

Stamped pieces are convenient for insert molding and are made from by a cold, laser or ultrasonic stamping process. Product forms Cold stamping is the most economical process and provides standard-tolerance pieces with edges that are not sealed. Cold stamping is possible for all fabrics. Piece dimensions range up to 1000 x 1000 mm Laser stamping provides a heat-sealed edge. Maximum dimensions are 480 x 480 mm Ultrasonic stamping is available for fabrics having mesh openings < 400 µm. It...

Our ribbons are used in a multitude of applications such as automotive and aerospace filters, household and industrial filters, electronic devices, diagnostic test strips, perfusion and transfusion filters in healthcare. Ribbons with a width up to 300 mm are wound onto polyester discs with an inner square hole 30 x 30 mm and an outer diameter of 61 mm Ribbons can also be rolled upon request onto ABS rings with an inner diameter of 76 mm (3") Ribbons wider than 300 mm are wound onto polystyrene...

Ethylene tetrafluoroethylene (ETFE) is a fluorine-based plastic. It was designed to have high corrosion resistance and strength over a wide temperature range. ETFE is a polymer and its source-based name is poly(ethene-co-tetrafluoroethene). ETFE has a relatively high melting temperature, excellent chemical, electrical and high-energy radiation resistance properties.

SEFAR MEDIFAB Quality Passes USP plastics class VI tests Biocompatible according to ISO 10993 Pyrogen-free Non-hemolytic, non-cytotoxic, low extractables Precision monofilament fabrics having defined surface characteristics Customer specific fabrication in a clean room class 7 (ISO 14644-1) Raw materials comply with FDA 21 CFR 177 Raw materials used are polyester (PETP) and polyamide (PA) Non-standard materials, e.g. polyetheretherketone (PEEK) or polypropylene (PP) can be supplied in MEDIFAB...

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-1/1Sefar Part #2: 3A03-0001-115-00Technical InformationMesh Opening: 1...

Ethylene tetrafluoroethylene (ETFE) is a fluorine-based plastic. It was designed to have high corrosion resistance and strength over a wide temperature range. ETFE is a polymer and its source-based name is poly(ethene-co-tetrafluoroethene). ETFE has a relatively high melting temperature, excellent chemical, electrical and high-energy radiation resistance properties.

SEFAR MEDIFAB Quality Passes USP plastics class VI tests Biocompatible according to ISO 10993 Pyrogen-free Non-hemolytic, non-cytotoxic, low extractables Precision monofilament fabrics having defined surface characteristics Customer specific fabrication in a clean room class 7 (ISO 14644-1) Raw materials comply with FDA 21 CFR 177 Raw materials used are polyester (PETP) and polyamide (PA) Non-standard materials, e.g. polyetheretherketone (PEEK) or polypropylene (PP) can be supplied in MEDIFAB...

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-5/1Sefar Part #2: 3A03-0005-115-00Technical InformationMesh Opening: 5...

Ethylene tetrafluoroethylene (ETFE) is a fluorine-based plastic. It was designed to have high corrosion resistance and strength over a wide temperature range. ETFE is a polymer and its source-based name is poly(ethene-co-tetrafluoroethene). ETFE has a relatively high melting temperature, excellent chemical, electrical and high-energy radiation resistance properties.

Ethylene tetrafluoroethylene (ETFE) is a fluorine-based plastic. It was designed to have high corrosion resistance and strength over a wide temperature range. ETFE is a polymer and its source-based name is poly(ethene-co-tetrafluoroethene). ETFE has a relatively high melting temperature, excellent chemical, electrical and high-energy radiation resistance properties.

SEFAR MEDIFAB Quality Passes USP plastics class VI tests Biocompatible according to ISO 10993 Pyrogen-free Non-hemolytic, non-cytotoxic, low extractables Precision monofilament fabrics having defined surface characteristics Customer specific fabrication in a clean room class 7 (ISO 14644-1) Raw materials comply with FDA 21 CFR 177 Raw materials used are polyester (PETP) and polyamide (PA) Non-standard materials, e.g. polyetheretherketone (PEEK) or polypropylene (PP) can be supplied in MEDIFAB...

NylonResistant to common solvents and to alkalies but are attacked by strong mineral acids.Good abrasion resistance and low coefficient of friction.Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).Water absorption is very high.Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed. Part Numbers Sefar Part #1: 03-6/5Sefar Part #2: 3A03-0006-115-10Technical InformationMesh Opening: 6...