Quantity:
    Nylon

    • Resistant to common solvents and to alkalies but are attacked by strong mineral acids.
    • Good abrasion resistance and low coefficient of friction.
    • Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).
    • Water absorption is very high.
    • Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed.

    Part Numbers

    Sefar Part #1: 06-1700/50
    Sefar Part #2: 3A06-1700-104-10

    Technical Information

    Mesh Opening: 1700 micron
    Open Area: 50 %
    Thread Diameter: 695 micron
    Weight (lbs): 0.71 lbs/yd^2
    Weight (oz): 11.4 oz/yd^2
    Weight (g): 385 g/m^2
    Thickness: 1300 micron
    Width: 41 inch
    Length: All mesh are sold in Yards.

    Material: Nylon
    Specific Gravity: 1.14 g/mm^3
    Tensile Strength: 41.67 daN/mm^2
    Stability to light: Poor
    Abrasion resistance: Good
    Acid resistance: Limited-Poor
    Alkaline resistance: Good
    Stability to solvents: Limited
    Hydrolysis resistance: Good